YMGI WMMS-18K-V2B(57)3 M1
$1,100.00
Single Zone 16 SEER
Line Sets/Wires Not Included
Description
Series (57)-16 SEER-DC Inverter Heat Pump Mini Split Set (Indoor Unit, Outdoor Unit, Remote Control)
Indoor Unit Model: WMMS-18E-V2B(57)3
Outdoor Unit Model: WMMS-18C-V2B(57)3
DC Inverter 16 SEER, 18,000 Btu/h, 208-230/1/60
| Indoor Unit | WMMS-18E-V2B(57)3 | |||
| Outdoor Unit | WMMS-18C-V2B(57)3 | |||
| Power supply | V/Ph/Hz | 208-230V/1/60Hz | ||
| Cooling | Nominal Capacity | Btu/h | 18000 | |
| Input | W | 1700 | ||
| Rated current | Amp. | 7.4 | ||
| EER | Btu/h.w | 9.7 | ||
| SEER | Btu/h.w | 16.0 | ||
| Heating | Capacity | Btu/h | 18000 | |
| Input | W | 1600 | ||
| Rated current | Amp. | 7.1 | ||
| COP | W/W | 3.20 | ||
| HSPF | Btu/h-w | 8.50 | ||
| Minimum Circuit Ampacity | Amp. | 15 | ||
| MAX HVAC Type Circuit Breaker |
Amp. | 20 | ||
| Compressor | Model | ATD141RDPA8JT | ||
| Type | Rotary | |||
| Brand | HIGHLY | |||
| Capacity | Btu/h | 5560 | ||
| Input | W | 1255 | ||
| Rated current(RLA) | Amp. | 4.2 | ||
| Refrigerant oil/oil charge | ml | α68HES-H or equivalent 480±20ml |
||
| Indoor fan motor | Model | YDK-50C-4P 3 A050501000360-R0 | ||
| Brand | CG | |||
| Input | W | 54 | ||
| RLA | Amp. | 0.22 | ||
| LRA | Amp. | 0.41 | ||
| Winding Resistance | Ω | 203/169 | ||
| Capacitor | uF | 1.8 | ||
| Speed (Hi/Me/Lo) |
rpm | 1300±20 1150±20 1000±20 |
||
| Indoor air flow (Hi/Me/Lo) | CFM | 471 / 417 / 362 | ||
| Indoor noise level (Hi/Me/Lo) |
dB(A) | 47 | ||
| Indoor unit | Dimension (WxDxH) | Inch | 35x11x8 | |
| Packing WxDxH) | Inch | 39x15x12 | ||
| Net/Gross weight |
lbs. | 29/33 | ||
| Outdoor fan motor | Model | YDK-40-6C 1 H3 A050501000238-R0 | ||
| Brand | CG | |||
| Input | W | 85 | ||
| RLA | Amp. | 0.37 | ||
| LRA | Amp. | 0.60 | ||
| Winding Resistance | Ω | 107/100.8 | ||
| Capacitor | uF | 3 | ||
| Speed | Rpm/M | 670 /870 | ||
| Outdoor air flow | CFM | 1159 / 1200 | ||
| Outdoor noise level | dB(A) | 53 / 41 | ||
| Outdoor unit | Dimensions (WxDxH) | Inch | 33.46” x 11.49” x 23.85” | |
| Packing (WxDxH) | Inch | 39x16x27 | ||
| Net/Gross weight | lbs. | 88/99 | ||
| R410A Refrigerant charge | Oz | 45.92 | ||
| Refrigerant precharge maximum pipe length | Ft. | 25 | ||
| Additional charge for each ft. | Oz | 0.23 | ||
| Design pressure | PSIG | 510/250 | ||
| Refrigerant piping | Liquid side/ Gas side |
Inch | 1/4″+1/2″ | |
| Max. refrigerant pipe length | Ft. | 49.2 | ||
| Max. difference in level | Ft. | 16.4 | ||
| Connection wires between IDU and ODU | 4×AWG18 | |||
| Control Type | Remote Control | |||
| Operation Temperature Ranges | Indoor (cooling/ heating) | °F | 61~90 | |
| Outdoor (cooling / heating) |
°F | AC: 15~115 / HP: -4 ~ 75 |
||
| Application area (cooling standard) |
Sq. ft. | 258~450 | ||
Important Notes:
- Performance rated for matched system at standard conditions-cooling ID 80/67°F, OD 95°F; heating ID 70/60°F, OD 47/43°F. Unit performance varies when weather changes from the standard one.
- Select equipment capacity sizes per space load calculation schedule and cooling & heating hours. Not to over size or under size equipment.
- Watch unit operation during extreme weather conditions in summer and winter. wind baffle helps system cooling & heating performance in low ambient temperatine ranges.
