YMGI WMMS-12K-V2A(57)2 M1
$800.00
Single Zone 16 SEER
Line Sets/Wires Not Included
Out of stock
Description
Series (57)-16 SEER-DC Inverter Heat Pump Mini Split Set (Indoor Unit, Outdoor Unit, Remote Control), 115/1/60
Indoor Unit Model: WMMS-12E-V2A(57)2
Outdoor Unit Model: WMMS-12C-V2B(57)2
DC Inverter 16 SEER, 12,000 Btu/h, 115/1/60
| Indoor Unit | WMMS-12E-V2A(57)2 | |||
| Outdoor Unit | WMMS-12C-V2A(57)2 | |||
| Power supply | V/Ph/Hz | 115V/1/60Hz | ||
| Cooling | Nominal Capacity | Btu/h | 12000 | |
| Input | W | 1180 | ||
| Rated current | Amp. | 11.4 | ||
| EER | Btu/h.w | 10.2 | ||
| SEER | Btu/h.w | 16.0 | ||
| Heating | Capacity | Btu/h | 13000 | |
| Input | W | 1300 | ||
| Rated current | Amp. | 12.5 | ||
| COP | W/W | 3.16 | ||
| HSPF | Btu/h-w | 8.20 | ||
| Minimum Circuit Ampacity | Amp. | 18 | ||
| MAX HVAC Type Circuit Breaker |
Amp. | 30 | ||
| Compressor | Model | 5RS102ZBC21 | ||
| Type | Rotary | |||
| Brand | Panasonic | |||
| Capacity | Btu/h | 8922 | ||
| Input | W | 1010 | ||
| Rated current(RLA) | Amp. | 4.4 | ||
| Refrigerant oil/oil charge | ml | FV50S or equivalent 320ml |
||
| Indoor fan motor | Model | YDK-16-4 L4 | ||
| Brand | CG | |||
| Input | W | 40 | ||
| RLA | Amp. | 0.30 | ||
| LRA | Amp. | 0.32 | ||
| Winding Resistance | Ω | 140/118.5 | ||
| Capacitor | uF | 4 | ||
| Speed (Hi/Me/Lo) |
rpm | 1250±20 1100±30 800±40 |
||
| Indoor air flow (Hi/Me/Lo) | CFM | 353 / 311 / 206 | ||
| Indoor noise level (Hi/Me/Lo) |
dB(A) | 42 | ||
| Indoor unit | Dimension (WxDxH) | Inch | 31x11x8 | |
| Packing WxDxH) | Inch | 38x14x12 | ||
| Net/Gross weight |
lbs. | 22/26 | ||
| Outdoor fan motor | Model | YDK-35-6HD 3 A050501000163-R0 | ||
| Brand | CG | |||
| Input | W | 79 | ||
| RLA | Amp. | 0.66 | ||
| LRA | Amp. | 0.86 | ||
| Winding Resistance | Ω | 52.5/51.5 | ||
| Capacitor | uF | 8 | ||
| Speed | Rpm/M | 900/600 | ||
| Outdoor air flow | CFM | 1147 / 765 | ||
| Outdoor noise level | dB(A) | 53 / 35 | ||
| Outdoor unit | Dimensions (WxDxH) | Inch | 31.96” x 10.11” x 21.25” | |
| Packing (WxDxH) | Inch | 36x13x23 | ||
| Net/Gross weight | lbs. | 71/75 | ||
| R410A Refrigerant charge | Oz | 39.52 | ||
| Refrigerant precharge maximum pipe length | Ft. | 25 | ||
| Additional charge for each ft. | Oz | 0.23 | ||
| Design pressure | PSIG | 510/250 | ||
| Refrigerant piping | Liquid side/ Gas side |
Inch | 1/4″+3/8″ | |
| Max. refrigerant pipe length | Ft. | 49.2 | ||
| Max. difference in level | Ft. | 16.4 | ||
| Connection wires between IDU and ODU |
4×AWG18 | |||
| Control Type | Remote Control | |||
| Operation Temperature Ranges | Indoor (cooling/ heating) | °F | 61~90 | |
| Outdoor (cooling / heating) |
°F | AC: 15~115 / HP: -4 ~ 75 |
||
| Application area (cooling standard) |
Sq. ft. | 172~300 | ||
Important Notes:
- Performance rated for matched system at standard conditions-cooling ID 80/67°F, OD 95°F; heating ID 70/60°F, OD 47/43°F. Unit performance varies when weather changes from the standard one.
- Select equipment capacity sizes per space load calculation schedule and cooling & heating hours. Not to over size or under size equipment.
- Watch unit operation during extreme weather conditions in summer and winter. wind baffle helps system cooling & heating performance in low ambient temperatine ranges.
