Series (58)-16 to 22 SEER-DC Inverter Heat Pump Mini Split Set (Indoor Unit, Outdoor Unit, Remote Control, with Installation Kit), 115/1/60
Indoor Unit Model: WMMS-09E-V2A(58)2
Outdoor Unit Model: WMMS-09C-V2A(58)2
DC Inverter 22 SEER, 9,000 Btu/h, 115/1/60
System Model
WMMS-12K-V2A/B(58)2
Functions
COOLING
HEATING
Power Source
A:115/1/60 B:208~230/1/60
Nominal heating capacity (ID 70/60 OD 47/43F)
13000
Standard Set-up Tested in Lab-Heating capacity (ID 70/60 OD17/15F)
11000
Standard Set-up Tested in Lab-Heating capacity (ID 70/60 OD 5F)
8900
Frequency(Hz) (High/Standard/Low)
80/57/15
75/65/15
Power Input (W) (High/ Standard/Low)
1450/1000/120
1500/1200/220
Rated Current (A) (High/ Standard)
A:14.5/7.5 B:6.8/3.5
A:14.5/11 B:7.0/5.2
SEER / HSPF (Btu/h.w)
20
9.6
EER (Btu/h.w)
12.5
Dehumidifying Volume (Pints/Hr.)
2.5
Indoor Unit (IDU)
Model of Indoor Unit
WMMS-12E-V2A/B(58)2
Fan Motor Speed (RPM) (SH/H/M/L)
1300/1080/900/740
1300/1160/1040/920
Air Flow Volume (CFM) (SH/H/M/L)
330/295/253/218
Output of Fan Motor (w)
20
Input of Heater (w)
/
Fan Motor Capacitor (uF)
4.0 / 1.0
Fan Motor RLA(A)
0.38 / 0.20
Fan Type-Piece
Cross flow fan-1
Fan Wheel Diameter-Length (In)
3.6 x 25.4
Evaporator Coil Type
Aluminum fin-copper tube
Coil-Copper Pipe Diameter (In)
0.28
Row-FPI
2-18.2
Coil length (L) x Height (H) x depth (D) (In)
25.4x1x10.5
Swing Motor Model
MP24AA
Output of Swing Motor (W)
2.4
Fuse (A)
PCB 3.15A
Sound Pressure Level dB (A) (SH/H/M/L)
40/36/32/26
Sound Power Level dB (A) (SH/H/M/L)
50/46/42/36
Outdoor Unit(ODU)
Model of Outdoor Unit
WMMS-12C-V2A/B(58)2
Compressor Manufacturer
Sanyo, Mitisubishi or Equivalent
Compressor Model
C-6RZ110H1A
Compressor Type
Twin Rotary DC
L.R.A. (A)
33
Compressor RLA(A)
4.59
Compressor Power Input(W)
800
Overload Protector
1NT11L-3979
Throttling Method
Electronic Expansion Valve
Fuse Circuit Breaker of HVAC Type
A:30 B:20
Starting Method
Transducer starting
Recommended Working Ambient Temp Range (°F)
15°F ≤ T ≤115 °F
5°F ≤ T ≤86 °F
Condenser Coil Type
Aluminum fin-copper tube
Coil-Copper Pipe Diameter (In)
0.35
Rows-FPI
2-18.2
Coil Length (L) x Height (H) x Depth (D) (In)
29.4X20X1.7
Fan Motor Speed (rpm) (H/L)
900/680
900±20
Output of Fan Motor (W)
40
Fan Motor RLA (A)
0.17
Fan Motor Capacitor (uF)
(DC)
Air Flow Volume of Outdoor Unit CFM
1120
Fan Type-Piece
Axial-1
Fan Diameter (In)
15.7
Defrosting Type
Auto defrost
Designed for Climate Type
T1
Isolation
I
Moisture Protection
IP24
MAX. Operating Pressure for the Discharge Side (PSIG)
551
MAX. Operating Pressure for the Suction Side (PSIG)
174
Sound Pressure Level dB (A) (H/M/L)
≤55
Sound Power Level dB (A) (H/M/L)
≤65
Connection Pipe (In)
Outer Diameter Liquid Pipe (In)
1/4
Outer Diameter Gas Pipe (In)
3/8
Max Distance ID Above/Blow OD (Ft.)
35/45
Max Distance Length (Ft.)
75
If Not Marked on Nameplate, Refrigerant Pre-charged for Copper Line Length
25
Check Pressure at Trial Running Add or Deduct Refrigerant
0.32
Dim. & Weight- Indoor Unit
Dimensions-Net W x H x D (Inches)
33.4 x 21.3 x 12.6
Dimensions of Carton Box W x H x D (Inches)
36.0 x 14.0 x 10.0
Gross / Net Weight (LBs)
31/24
Dim. & Weight- Outdoor Unit
Dimensions-Net W x H x D (Inches)
33.4 x 21.3 x 12.6
Dimensions of Carton Box W x H x D (Inches)
34.6 x 22.8 x 14.2
Gross / Net Weight (LBs)
97/88
Container Loading
Assumed-One Model/Container Sets (20’/40’/40’HQ)
109/232/252
Certification
Safety Approval (Third Party)
ETL (C & US)
Performance Approval (Third Party)
AHRI
Important Notes:
Performance rated for matched system at standard conditions-cooling ID 80/67°F, OD 95°F; heating ID 70/60°F, OD 47/43°F. Unit performance varies when weather changes from the standard one.
Select equipment capacity sizes per space load calculation schedule and cooling & heating hours. Not to over size or under size equipment.
Watch unit operation during extreme weather conditions in summer and winter. wind baffle helps system cooling & heating performance in low ambient temperatine ranges.
